All data is for information only------(<---links)
	PRODUCT DATA of Dunmore DM100

Material	Dunmore DM100
Product Type	Aluminised Kapton HN, acrylic (Y966) pressure-sensitive release liner.
Chemical Composition	Polyimide (Kapton HN), Aluminised/Acrylic adhesive.
Name of Manufacturer	Dunmore Coorperation Keystone Industrial Park, 2900 Wharton Rd., Bristol, PA 19007, USA +1 215 781 8895 +1 215 781 9293 www.dunmore.com

	EXPERIENCE IN PRACTICE

Development Status	Commercial Product
Cost Range	Medium
Lot Reproducibility	Excellent
Space Experience	Good

	PHYSICAL PROPERTIES

Specific Gravity	1.42 Data Quality: Manufacturer's data
Standard Width	2.54 mm Data Quality: Manufacturer's data
Thickness	0.025 mm Data Quality: Manufacturer's data
Shelf Life	12 month @ Room Temperature Data Quality: Manufacturer's data

	ELECTRICAL PROPERTIES

Electrical Volume Resistivity

1.5e15 ohm.m @ 38% RH Data Quality: Manufacturer's data

	THERMAL PROPERTIES

Thermal Conductivity	0.0155 W/m.K @ 23°C Data Quality: Manufacturer's data
Thermal Expansion Coefficient	20 μstrain/°C (-14°C to 38°C) Data Quality: Manufacturer's data
Specific Heat	1.09 J/g.K @ 23°C Data Quality: Manufacturer's data

	RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY

Toxicity/Offgassing	Pass Test: NASA NHB 8060.1A
Temperature Range(space)	-40 to +160°C. Data Quality: Manufacturer's data
Outgassing	TML = 0.70% CVCM = 0.04% Test: 3M data / NASA 1061 and ASTM E-595
Moisture Absorption	1.8% @ 50% RH Test: Dupont Data (@ 23°C)
Adhesion	55.8 g.mm width Data Quality: Manufacturer's data/ ASTM D3330

	SPECIAL RECOMMENDATIONS

Special Recommendations

All tapes are a standard length of 105 ft ± 5%. (Maximum length available is ca. 160ft.). · All tapes are wound on a 3 ± 0.5 in. diameter core. · Recommended shelf life is a period of one year after date of manufacture, when tape has been stored properly at normal room temperature. · Kapton HN / Y966 acrylic pressure-sensitive tapes can be perforated. · This product is also available with Dunmore's 'corrosion-resistant coating'. · 'Y966' acrylic P/S release liner can also be applied to the metallised surface to provide second-surface mirror capabilities, if desired. · 'Y966' acrylic P/S release liner can also be applied to 51, 76 and 125 micron thick films. · The full Dunmore part number must be designated for precise material description. · 'Y966' high~temperature acrylic tapes are primarily used when high-temperature performance and excellent bond strength are required. · Solar absorptance value is measured on the aluminised side only.